Neopine TTL hotshoe cord for multiple flash, let the light unit can be shown above with the use of the camera body. With flash operation method in the viewfinder shutter speed and flash ready light is connected directly to the camera when the usage. Because the hotshoe cord has multiple flash terminal function, which can be used without a TTL multiple flash function as the main flash device for multiple flash photography. This TTL hotshoe cord is about 1.5m for Nikon DSLR camera.
Neopine TTL digita off hotshoe cord can eliminate harsh shadows for truly stunning portraits or interior effects. For the total amount of light from all flash units is measured through the lens at the camera position, there is no need to calculate exposure or use an independent flash meter. Enjoy a new world of flash photography with a single speedlight. The hotshoe cord is used for TTL multiple flash to enable the master flash unit to be used off-camera with cameras. When using the cord, the shutter speed and ready-light indication in the viewfinder operate just as do when the flash unit is mounted on camera.
How to use Neopine TTL digital off hotshoe cord?
1. Attach the master flash unit to the camera.
Use a speedligt compatible with TTL auto flash mode as the master flash unit. In TTL multiple flash shooting, the master flash unit connected directly to the camera must be a flash unit compatible with the TTL auto flash mode. Mount the speedlight directly on the camera.
2. Connect master flash unit to remote flash unit.
3. Set Flash units' mode selector to TTL.
4. Turn on flash units and camera's meter.
5. Take the pictures.
Notice:
Using more than one flash unit depends on the lighting ratio or balance of illumination between flash units. In determining the role of each flash unit, first decide which will be the master flash unit and which units will be remote. In general, there are two ways of controlling the lighting ratio-by varying the distance between flash and subject, or by diffusing the light by bouncing it off the ceiling or walls or using a diffuser between flash and subject. Varying the flash to subject distance is easier to control.
Interested in this camera TTL hotshoe cord? Just come to Neopine official site and inquiry more about camera accessories: http://www.hkneo.com/
